PCOMM Keyboard Configuration


PCOMM Configuration

Note: Please click here to download PCOMM - https://tigerware.lsu.edu/Software/256/IBM-PComm#

Note: The Keyboard will need to be mapped in order for both of the “Enter” buttons to work correctly on the keyboard.

 

To Edit the Configuration:

1. Open Windows File Explorer

2. Choose Computer or This PC in the left-hand menu and click Local Disk C:

3. Navigate to Program Files (x86) \ IBM \ Personal Communications \ Private

4. Select the PCSWINKB83 or PCSWINKB85 file and copy it

5. Paste the file to a readily accessible area (such as your desktop)

6. Open PCOMM and go to Edit > Preferences > Keyboard

7. Choose "user defined" next to "current keyboard"

8. Select browse

9. Navigate to the file where you pasted the PCSWINKB file (from step 5) and select it

10. Click "OK" to save.

Note: If "pcswinkb3" or "pcswinkb5" are not available, or if you'd like to further customize your keyboard functions, please see the manual configuration instructions below.

 

To Edit the Configuration Manually:

1. Open an LSU Mainframe session by double clicking “LSU_Mainframe_PComm” configuration file (likely in your downloads or saved to your desktop)

2. Click “Edit > Preferences > Keyboard”, then click the “Customize” button

3. On the sample keyboard shown on the ensuing screen, click the Enter key labeled like this: <-‘

Click the <-' key

 

4. Under the “Change current actions for selected keys” section, click in the field to the right of “Base” and make the following change exactly (including square brackets): replace [newline] with [enter/ctrl]

Change the text in the textbox to the right of Base

 

5. Click “File > Save As” and name the file “keymap1.kmp”. Then click “File > Exit”

Steps for saving the file

 

6. On the “Keyboard Setup” dialog box, change the selection from “IBM-Default” to “User-Defined” and then click the “Browse” button.

Select User Defined and click the Browse button

 

7. Click on the file “keymap1” to select it and then click the “Open” button at the bottom right.

Browsing the Keyboard files

 

8. Click the “OK” button to accept changes and the Enter key should now work as desired.

 

Note: If you are using Windows 10 the file may be blocked from being installed. You may need to turn off UAC, SmartScreen settings and log on as Local Administrator to install it. So if a user runs into issues, they may need to right click on the file and "Run as administrator" before installing.

 

For additional assistance, you can contact the Help Desk at 225-578-3375.
19620
6/18/2019 11:48:17 AM